Nickel (II) tetrapyridyl complexes as electrocatalysts and precatalysts for water oxidation

Two nickel complexes, [Ni(tpen)](ClO₄)₂.0.5CH₃COCH₃ ( 1 ) and [Ni(tpbn)](ClO₄)₂ ( 2 ), of tetrapyridyl ligands N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,2-ethanediamine (tpen) and N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,4-butanediamine (tpbn) were prepared and their catalysis for water oxidation reaction (WOR) studied. In 0.1 M phosphate buffer solution (PBS) of pH 8.0, complex 1 is a homogeneous molecular catalyst with an overpotential of ~440 mV and a Faradaic efficiency of 89%. At pH ≥ 9.0, complex 1 degraded gradually during the catalytic process and formed NiO_x composite (nickel oxide with general formula Ni_xO_yH_z) active for WOR. In contrast, complex 2 deteriorated under measured conditions (pH 8.0–12.0) and formed NiO_x composite active for WOR. The NiO_x composite derived from 1 in 0.1 M PBS at pH 11.0 showed an activity with an overpotential of ~500 mV, a Tafel slope of ~90 mV/decade and a Faradaic efficiency of 97%. Mechanisms were proposed for water oxidation catalyzed by 1 and 2 . This work revealed that the catalytic activity of the nickel complexes was related to the flexibility of the tetrapyridyl ligands and the adaptability of the coordination sphere of the nickel(II) center.     

CuFe2O4 magnetic heterogeneous nanocatalyst: Low power sonochemical-coprecipitation preparation and applications in synthesis of 4H-chromene-3-carbonitrile scaffolds

The paper presents the synthesis and catalytic activity of CuFe₂O₄ nanoparticles. The CuFe₂O₄ nanoparticles have been prepared by sonochemical route under low power ultrasonic irradiation (UI) and using silent stirring at room temperature only (ST) along with co-precipitation method, without using any additive/capping agent. The synthesized magnetic nanoparticles were successfully used and compared for the synthesis of 4H-chromene-3-carbonitrile derivatives. The CuFe₂O₄ nanoparticles obtained by sonochemical route exhibit higher catalytic activity because of small size (0.5–5 nm), high surface area (214.55 m²/g), high thermal stability up to 700 °C, recyclability and reusability due to its magnetic characteristics than CuFe₂O₄ nanoparticles obtained by room temperature silent stirring. The synthesized CuFe₂O₄ nanoparticles were characterized by FT-IR, SEM–EDX, HR-TEM, XRD, TGA/DTA/DTG, BET, VSM techniques. The present method is of great interest due to its salient features such as environmentally compatible, efficient, short reaction time, chemoselectivity, high yield, cheap, moisture insensitive, green and recyclable catalyst which make it sustainable protocol.     

Morphology and properties of super-toughened bio-based poly(lactic acid)/poly(ethylene-co-vinyl acetate) blends by peroxide-induced dynamic vulcanization and interfacial compatibilization

Super-toughened poly(lactic acid) (PLA)/poly(ethylene-co-vinyl acetate) (EVA) blends were prepared via 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane (AD) induced dynamic vulcanization and in situ interfacial compatibilization. The effects of AD on the morphology and properties of PLA/EVA blends were studied using a Brabender torque rheometer, gel content test, scanning electron microscopy (SEM), differential scanning calorimetry (DSC) thermogravimetric analysis (TGA) and mechanical properties test. The torque and gel content demonstrated that EVA and PLA was successfully vulcanized in the presence of free radicals obtained by the decomposition of the 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane (AD). Additionally, the gel content results indicated that, compared with PLA, EVA is more aggressive with free radicals. The SEM revealed that a relatively uniform phase morphology and good interfacial compatibilization were achieved in the dynamically vulcanized PLA/EVA/AD blends. The interfacial reaction and compatibilization between the component polymers resulted in the formation of super-toughened PLA/EVA blended materials.     

n-In0.35Ga0.65N/p-Si异质结的制备及其电学性能研究

采用双光路双靶材脉冲激光沉积(PLD)系统在p-Si衬底上外延生长InGaN薄膜,研究了InGaN薄膜的显微组织结构和n-InGaN/p-Si异质结的电学性能。研究表明,InGaN薄膜为单晶结构,沿[0001]方向择优生长,薄膜表面光滑致密,In的原子含量为35%。霍尔(Hall)效应测试表明In_0.35Ga_0.65N薄膜呈n型半导体特性,具有高的载流子浓度和迁移率及低的电阻率。I-V曲线分析表明In_0.35Ga_0.65N/p-Si异质结具有良好的整流特性,在±4 V时的整流比为25,开路电压为1.32 V。In_0.35Ga_0.65N/p-Si异质结中存在热辅助载流子隧穿和复合隧穿两种电流传输机制。经拟合,得到异质结的反向饱和电流为1.05×10^-8 A,势垒高度为0.86 eV,理想因子为6.87。     

Analysis of 1:1 internal resonance of a CFRP cable with an external 1/3 subharmonic resonance

Nonlinear Dynamics - Based on the non-planar vibration equations of a cable made of carbon fiber reinforced polymer (CFRP), the nonlinear behaviors of the cable are studied. The one-to-one internal...     

Stereoselective construction of azepine-containing bridged scaffolds via organocata-lytic bicyclization of yne-allenone esters with nitrones

A new organocatalytic double annulation cascade involving scission/recombination of N-O bonds of nitrones is reported for the first time, and used to produce a range of hitherto unprecedented tricyclic bridged-fused benzo[d]azepines bearing three stereogenic centers with moderate to good yields and complete diastereoselectivity. A quinine-catalyzed reaction of yne?allenone esters with nitrones worked well and provided a convergent and regioselective pathway to access these three-dimensional scaffolds from the planar conjugated system. Density functional theory (DFT) calculations have been applied to understand the key process for forming diradical intermediates.     

Continuous synthesis of dolutegravir sodium crystals using liquid-gas heterogeneous microreactor

In this work, a liquid-gas heterogeneous microreactor was developed for investigating continuous crystallization of dolutegravir sodium (DTG), as well as revealing reaction kinetics and mixing mechanism with 3-min data acquisition. The reaction kinetics models were established by visually recording the concentration variation of reactants over time in the microchannel via adding pH-sensitive fluorescent dye. The mixing intensification mechanism of liquid-gas flow was quantified through the fluorescent signal to indicate mixing process, demonstrating an outstanding mixing performance with a mixing time less than 0.1 s. Compared with batch crystallization, continuous synthesis of dolutegravir sodium using liquid-gas heterogenous microreactor optimizes crystal distribution size, and successfully modifies the crystal morphology in needle-like habit instead of rod-like habit. The microreactor continuous crystallization can run for 5 h without crystal blockage and achieve D90 of DTG less than 30 µm. This work provides a feasible approach for continuously synthesizing dolutegravir sodium, and can optimize the existing pharmaceutical crystallization.     

Rare earth complexes chemiluminescence catalyzed by gold nanoparticles for fast sensing of Tb3+ and Eu3+

Developing multiplex sensing technique is of great significance for fast sample analysis. However, the broad emissions of most chemiluminescence(CL) luminophores make the multiplex CL analysis be difficult. In this work, a simple and sensitive CL analytical method has been developed for the simultaneous determination of Tb³⁺and Eu³⁺thanking to their narrow band emission. The technique was based on a mixed CL system of periodate(IO₄^-)-hydrogen peroxide(...     

Manipulation of the PdAu‒PdAuOx interface on Pd-Au bimetallic catalysts for the direct synthesis of hydrogen peroxide

Direct synthesis of H₂O₂ from H₂ and O₂ via heterogeneous catalysis is an environmentally friendly and atomically economic alternative to the traditional anthraquinone oxidation (AO) process. Optimizing the electronic and geometric structures of the active metals to break the current limitations of hydrogenation rate and H₂O₂ selectivity is a promising and challenging topic. In this study, a series of Pd-Au bimetallic catalysts supported on TiO₂ with a metal loading of 3.0 wt% and a constant Pd/Au molar ratio (Pd:Au = 2:1) were prepared. The catalysts were reduced in H₂ at different temperatures (473, 573 and 673 K), and their catalytic activity for the direct H₂O₂ synthesis were evaluated at 283 K and 0.1 MPa. H₂ reduced Pd-Au catalysts exhibited superior performance in direct H₂O₂ synthesis. The maximum H₂O₂ selectivity of 87.7% and H₂O₂ yield of 3116.4 mmol h⁻¹ g_Pd⁻¹ were achieved over the Pd_2.0Au_1.0-573 catalyst with a H₂ conversion of 12.8%. The tailored local chemical environment caused by H₂ reduction creates a balanced ratio of Pd⁰ and PdO_x sites, thus improving the selectivity towards H₂O₂. This work developed an effective strategy for fabrication of highly active and stable Pd-based H₂O₂ synthesis catalysts with high H₂O₂ yield.     

Facile synthesis of Z-scheme NiO/α-MoO3 p-n heterojunction for improved photocatalytic activity towards degradation of methylene blue

In this article, Z-scheme NiO/α-MoO₃ p-n heterojunction is successfully synthesized by a facile hydrothermal route. The phase and nanostructures are researched through a series of characterizations, such as XRD, SEM, TEM, EDX, XPS and DRS. It is confirmed that the NiO nanoparticles are deposited homogeneously on one dimensional α-MoO₃ nanobelts and p-n heterojuction is constructed at the interface of α-MoO₃ and NiO. Photocatalytic activity of the as-synthesized photocatalysts is investigated by photodegradation of methylene blue (MB) under simulated solar light irradiation. Compared with bare α-MoO₃, the NiO/α-MoO₃ p-n heterojunction exhibits significantly improved photocatalytic activity and photostability for MB degradation. The improvement in the photocatalytic performance can be attributed to the optimization of the charge transport pathway offered by Z-scheme heterojunctions, which can promote the effective separation of electron-hole pairs. The results indicate that Z-scheme NiO/α-MoO₃ p-n heterojunction is a novel and efficient photocatalyst with potential application for the removal of organic contaminant in wastewater.